Suitable for difficult environmental conditions and locations with high hygienic standards, as in the food, pharmaceutical and chemical industry.
High Operational Security
Fast and error-free operation is ensured by a colour display for the indication of weight, IDs and operator prompts in combination with an easy-to-use keyboard.
IT3 connects to one or two scales with analog strain gauge load cells, entry impedance 43 Ohm–3.3 kOhm (e.g. suitable for 8 x 350 Ohm load cells), or via zener barriers, entry impedance 87.5 Ohm–3.3 kOhm (e.g. suitable for 4 x 350 Ohm load cells).
W&M approved resolution of up to 10,000 d. Calibration is possible as single or multiple-range (e.g. 3 x 3000 d) and as single or multi interval scale. Interface modules for digital load cells are available as options.
Display of net, tare and gross weight. Operator prompting with entry of up to 20 additional IDs (e.g. order No., customer No., product No., etc). Prompts and length of entries are configurable. Weighing data can be stored in an internal W&M approved data archive (only for operating modes BASIC, TRUCK and ONLINE). Parts counting and totalizing is also possible. Plug-on modules are used to set IT3 up for applications of varying complexity.
Via optional printer interface. The print layout for labels or forms is fully configurable. Printout of weights, totals, date, time, stored texts, entered IDs and calculated values.
Data Transmission To PC
Transmission of all entered IDs, date, time and weight after each weighing cycle, data storage on the PC’s hard disk.
PC ONLINE Mode
Via optional PC interface. Reading of weight, taring, zero setting and other functions can be remotely controlled from a PC. Weights can be stored in a W&M approved data archive in the IT3 or on the PC’s hard disk for verification. Data transmission is possible through serial interface or Ethernet LAN.
Switching And Filling
With an optional input/output module two weight thresholds can be monitored, e.g. for max. or min. values. The start of the weighing cycle and taring is possible from external switches. Alternatively, the inputs and outputs can be used for a filling sequence with start/stop switch.